This DIY was submitted by the author, and tells how to build a submarine out of pvc pipes and bilge pumps. The purpose of this device was to make a underwater camera case that evolved into a full controllable machine. This site has lots of pictures and gives some detail about how to build it. He stated that he is going to remake it so that it will be smaller, and will go faster. He will give more how-to information upon that time. Thanks for the submission. If anyone else has submissions, go to my submit howto project tab, and submit. I will give you credit for it. Also, I have a new website layout with new colors. No more puke yellow and brown. (And there was much rejoicing). Give me input on my site. Let me know if there are any problems with it. Also, the categories feature is broken, and I am not sure how to fix it. I will be working on it, and hopefully, I will be able to categorize all of my posts to make navigation easier for everyone.
Cheers
Greg
Link to article:
Submitted by www.rollette.com
6 Responses to “Underwater Submarine”
Leave a Reply
plz tell how 2 build it
I wanted a very good guide on the concepts on which a full fledged(that is capable of adjusting
depth precisely etc) submarine) can be built.I also wanted information on concept related
to(concepts behind perfect streamline design of a body + the equation behind opposition offered by a
free falling body with stream lined design ).Can you pls suggest me any book or doit yourselves kit or any other references in this regard
my email id is kamat.ajith@gmail.com
Actually I wanted an excellent guide about the circuit diagrams and the required kits for the making of the free line sandwich robot .so sir i would be very much pleasd if u can do the need full. thank you
Actually I wanted an excellent guide about the circuit diagrams and the required kits for the making of the sandwich line following robot .so sir i would be very much pleasd if u can do the need full. thank you
I am interested in building my own submarine with a operating depth of 150 meters or better and a range of 5000km or better. For amature enthusiast
The vessel would be 25 meters in length, beam 7 meters. Am looking for designs that would qualify class requirements. Interested parties in a collabration contact me at 65-81948998 or e-mail at jeffrey_peter@yahoo.com